Cleaning Instructions & Images – Holly Lodge

Complete Checklist >

Bathroom

Check there is enough shower Gel, Hand Wash and Toilet Paper. Hand Towel on the radiator and Bath Mat laying on the side of the bath.

Kitchen

Bedroom 1

Bedroom 1: As a Double

Please put 2 large and 2 small towels on the bed, preferably rolled – The blanket can be across the foot of the bed or on the sofa bed

Bedroom 1: with Sofabed

Please put 1 large and 1 small towel on each bed, preferably rolled. Put blanket on the sofa bed. (Sofa bed set-up photos below if needed)

Sofabed Instructions

Bedding for the sofa bed is stored in the Bedroom 2 cupboard and the porch chest.

Now add the sheet, and quilt/pillow covers.

Bedroom 2: as 2 Singles

Please put 2 large and 2 small towels on each bed, preferably rolled. The blanket can be placed across the foot of the bed or on the blanket box

Bedroom 2: As a Double

Please put 2 large and 2 small towels on each bed, preferably rolled. The blanket can be placed across the foot of the bed or on the blanket box

Changing from singles to a double

1. Bedside tables – move out of the way while putting beds together.
2. Take the single mattress protectors off (If possible, remove both protectors at the same time, then fold them. This makes it easier to put them back on next time). **In bedroom 2, put them in the blanket box. For bedroom 1, put them upstairs in Rose Lodge.
3. Connect the beds – Put beds together and attach metal clips first at headboard end then the foot, zip mattresses together.
4. Put mattress protectors on (Bed 2: found in the grey box – Bed 1: upstairs in Rose Lodge)
   • Start with the thin mattress protector (it just lies on top of the mattress)
   • Next, the mattress topper (lines horizontal to the headboard)
   • Finally, the quilted mattress protector.
5. Now put on the bedding

Here is Bedroom 2 as a double

Changing from double to singles

1. Bedside tables – move them out of the way while separating the beds.
2. Mattress protectors – There are 3 double ones – quilted, mattress topper and a thin one. Take them off and fold them separately.  Put them in the grey blanket box (or in the white box in the porch if you’re in bedroom 1)
3. Separate the beds – unzip the mattresses and unclip the silver bars at the head and foot of the bed. Move the beds apart and put the bedside tables between them (be careful with the lamp leads, it’s a tight fit over the headboards)
4. Mattress protectors. They should be together, but if not, put the quilted one on top of the thinner one (see photo). They are kept in the bottom drawer in bedroom 2 (or in the white box in the porch if you’re in bedroom 1)
5. Now put on the bedding

Lounge Setup

Complete Checklist >